The new JCB electric excavator is the quietest digger in its range and delivers zero emissions. Designed to meet a growing need for zero-emission environmentally-friendly construction equipment, JCB CEA will launch the electric-drive 19C-1 E-TEC mini excavator to the market at the beginning of 2020.
The 19C-1 E-TEC will provide contractors with a zero-emission, low-noise solution, allowing them to work independently, in late-night urban conditions, within buildings and even in rail tunnels with no requirement for costly exhaust extraction equipment. The 19C-1 E-TEC points the way to a new zero-emission future for JCB mini excavators.
Key features of the 19C-1 E-TEC include:
- Three lithium-ion battery packs providing a 312Ah (15kWh) storage capacity
- A standard load-sensing hydraulic system delivering powerful digging performance
- Convenient onboard charger with 230V input for 6-hour recharging capability
- Comprehensive battery management system ensures full-shift availability
- Fast charge option on launch allowing a full charge in 2.5 hours
Zero emissions
With the drive towards lower emissions, the zero-emission JCB 19C-1 E-TEC will allow contractors to work inside buildings and in emissions-sensitive inner city environments. It will also allow rail contractors to operate in tunnels and underground, without having to install costly exhaust extraction equipment.
Low noise
Another huge advantage of the new electric mini is that the external noise, at 7dBA lower, is a massive five times quieter than its traditional diesel-powered counterpart. This means contractors can work after normal hours in urban streets without disturbing residents, as well as operating in other noise-sensitive environments including hospitals and schools.
Daily checks
On digging there is no compromise on performance with the fully charged electric machine capable of putting in a full shift in normal operation. And with no daily checks of coolant and engine oil levels required, the machine is off to work quicker than its diesel counterpart.
Battery technology
Based on the premium specification 19C-1 conventional tail swing model, that was unveiled in 2018, the electric excavator replaces the standard machine’s diesel engine with an electric motor and three, next-generation 104Ah battery packs, to deliver a full energy capacity of 312Ah (15kWh). The modular batteries utilise the most advanced NMC lithium-ion cells, shared with the latest road cars, in a rugged battery pack housing that has been designed to withstand the rigours of off-highway construction use.
Digging performance
Using the latest 48V electrical system, the highly efficient electric motor delivers instant, greater torque than the standard machine’s diesel engine. The motor drives the 19C-1 E-TEC’s proven Bosch Rexroth load-sensing hydraulic system, delivering the same sector-leading digging performance as the standard 1.9-tonne excavator.
The high efficiency of this advanced electric-hydraulic combination means considerably lower cooling requirement – only a small hydraulic cooler with a small thermostatic electric fan and no engine radiator – contributing to longer battery life and the much lower noise level. The 19C-1 E-TEC is equipped with the same adjustable undercarriage and choice of digging equipment as the diesel model, to provide maximum digging depth of 2,576mm with the longer 1,100mm dipper arm.
Charging
A convenient onboard charger is provided as standard, allowing the machine to be fully recharged in six hours, using a conventional 230V plug. JCB will also offer a fast-charging option, a heavy-duty off-board unit, allowing a full charge in 2 1/2 hours. The self-contained power system means that there is no requirement for an electrical power connection or cable during machine operation. The battery packs allow a full working day in a typical duty cycle or four hours of operation in an extreme duty cycle. The 1.9-tonne machine will be capable of handling a range of powered attachments, making it an ideal base carrier for demolition and refurbishment projects.
Rops/tops certification
Initially, the mini excavator will be available with the ROPS/TOPS and FOGS certified canopy. As the electric excavator is based on the premium specification 19C-1, the excavator comes with proportional rocker switches for auxiliary functions and boom offset swing. The premium model also has a membrane switch pad to the right of the operator for all additional controls, while the fuel gauge has been replaced by an easy to read charge level readout.
500- hour greasing intervals
The 19C-1 E-TEC benefits from a new box-section main boom and dipper arm, with all hoses routed through the boom structure for added protection. The boom pins and dozer pivot points come with sealed graphite-impregnated bushings, allowing 500-hour greasing intervals. All grease points are located on one side of the machine to reduce downtime and there are fewer daily checks, as the 19C-1 E-TEC has no engine oil, coolant or fuel tank.
Source: JCB
Copyright 2017-2023 All rights reserved.